供應作鼓式剎車片、盤式剎車片、變速器離合器面片等摩擦材料的黏合劑用的酚醛樹脂，具有優異的耐熱性和良好的黏結性。
We offer phenolic resins as binder for friction materials which are used for brake linings, disc brake pads, clutch plates of transmission and others with superior heat resistance and adhesive performance.
|
品目 Product Code |
流動度 Flow |
凝膠化時間 Gel Time |
六胺 Hexa |
游離苯酚 Free P |
特長 Feature |
|||
|---|---|---|---|---|---|---|---|---|
|
mm /125oC |
Sec /150oC |
% |
% |
柔軟 Flexibility |
耐熱 Heat resistance |
環境 Environment |
短時間成型 Short molding |
|
| PR-33828 | 12 | 36 | 11.5 | 0.5 |  |
|
||
| FB8112 | 16 | 110 | 9 | 0.5 | |
|||
| PR-55694 | 20 | 90 | 13 | 3.0 | |
|||
| PR-50099 | 20 | 110 | 9 | 2.0 | |
|||
| PR-217 | 20 | 110 | 6.5 | 2.0 | |
|||
| FB8027 | 20 | 38 | 9 | 0.2 | |
|
||
| PR-50590 | 29 | 120 | 9.0 | 3.0 | |
|||
| PR-50869B | 40 | 120 | 12.5 | 1.0 | |
|||
| PR-51510 | 40 | 120 | 7 | 2.0 | |
|||
| FB8145 | 60 | 110 | 7.5 | 0.5 | |
|
||
| FB8157 | 73 | 100 | 9.0 | 0.5 | |
|
||
|
品目 (改性) Product Code (Modification) |
流動度 Flow |
凝膠化時間 Gel Time |
六胺 Hexa |
游離苯酚 Free P |
特長 Feature |
|---|---|---|---|---|---|
|
mm /125oC |
Sec /165oC |
% |
% |
||
| PR-53497 (Phenoxy) | 27 | 46 | 12 | 2.5 | 耐摩耗 Wear Resistance |
| PR-55291 (Acryl Rubber) | 33 | 34 | 12 | 0.5 | 寒冷地低噪聲 Low Noise in Cold Climates |
| PR-54458A (Special Aromatic) | 33 | 180 | 11 | 3.0 | 耐熱性 Heat Resistance |
| PR-54529 (Silicone Gel) | 37 | 41 | 10 | 1.0 | 低噪聲(低早晨噪聲) Low Noise (Low Morning Groan) |
| PR-53769 (Cashew) | 40 | 34 | 7 | 3.0 | 低噪聲 Low Noise |
上述是代表值，非保證值。
These values on the table are representative values. They are NOT specification.
|
品目 Product Code |
流動度 Flow |
凝膠化時間 Gel Time |
六胺 Hexa |
游離苯酚 Free P |
特長 Feature |
|---|---|---|---|---|---|
|
mm /125oC |
Sec /150oC |
% |
% |
||
| PR-55732A | 20 | 30 (165℃) | 5 | 1.5 | 耐Fade Good Fade resistance |
| PR-55694 | 20 | 90 | 13 | 3.0 | 耐熱 Heat resistance |
| PR-217 | 20 | 110 | 6.5 | 2.0 | 柔軟 Good Flexibility |
請詢問有關濕式離合器用樹脂 . (About resins for wet paper clutch facing, please contact us.)
屬于1液加熱固化型的酚醛樹脂接著劑。
接著強度、耐熱性優越、適用于汽車、二輪車等的制動器、離合器片面。
(These are one liquid thermoset type Phenolic resin Adhesive.
They show good adhesive strength and high heat resistance,
and are suitable for brake and clutch application of motorcar, motorcycle.)
|
品目 Product Code |
外観 |
比重 Specific Gravity |
粘度 Viscosity |
凝膠化時間 Gel Time |
固成分 Resin Content |
用途 Application |
|---|---|---|---|---|---|---|
| – |
-/25oC |
mPa?s/25oC |
Sec/165oC |
%/135C |
||
| PR-55871 | 藏青色 | 0.83 | 2 | 15 | 10 | 噴霧用低粘度 Low viscosity for Spray |
| PR-55735 | 黑色 | 0.97 | 45 | 10 | 40 | 噴霧用低粘度 Low viscosity for Spray |
| PR-55735A | 紅褐色 | 0.873 | - | - | 20 | 噴霧用低粘度 Low viscosity for Spray |
推薦使用條件 (Recommended condition)
干燥：50-100℃、2-5分鐘 (Dry : Temp. : 50 – 100℃, Time : 2 -5 min)
成形：150-200℃、15-60分鐘 (Mold : Temp. : 150 – 200℃, Time : 15-60min)
請根據客戶的用途、使用環境決定條件.
These conditions are just for reference.
The specific condition must be determined from individual application.
上述是代表值，非保證值。
These values on the table are representative values. They are NOT specification.
